wireless video baby monitor

SpecificationsAdopt frequency hopping spread spectrum(FHSS)
Anti-interference and sound clarity
Work Frequency Band: 900MHZ

Features:

*Adopt frequency hopping spread spectrum(FHSS),Anti-interference and sound clarity

*Work Frequency Band: 900MHZ ISM,905—925MHZ

*Long distance transmission,200-300 meters in the open field

*Support 1 receiver matching 2 transmitters,AB Switches for selecting the transmitters

*Transmitter and Receiver need making pairing code before any operation, Confidentiality is strong

*Support 60 simultaneous Users at the same time and without interference each other

*With temperature, bed-wetting, vibration alarm function

1:Antenna

2:LOW/POWER Two-color indicator led,Low voltage/Work and code indicator led,functions as below:
*Green indicator led light is on:DC Power plugs supply the power or battery supply the power normally
*Red indicator led light is on:Low battery voltage
*Green indicator led flash:paring code state;After paring code,the code indicator led of the receiver will be off,then short press the power key of transmitter/code key is ok.
3:Charging indicator, The LED is on when charging,and the LED is off when the battery is full or without battery.
4:DC6V Power Input;
5:Wet sensor:Wired wet sensor interface
*Detect the Child is bed-wetting,the receiver will get alarm voice and the LED light flash;It will stop alarm after removing the wet
6 :Microphone,Pick up the sound and signal from Transmitter
7:Power/Code Switch
*Short press for switch on/Switch off
*Long press for paring code when it is shutdown state,two-color green led flash.
8:Temperature sensor,When the temperature of the transmitter is over 40 degree or below 0 degree,the receiver will get alarm voice and the LED light flash.
9:Battery cover,3 pcs AA Dry Battery      

B:Receiver Key Function Illustration

1:Antenna
2:Power/Code Switch
*Short press for switch on/Switch off
*Long press for paring code when it is shutdown state,two-color green led flash.
3.vibration Setup Key, Set the vibration alert sensitivity
4:A/B channel switch: switch two different channels’ transmitter
5:Charging indicator, The LED is on when charging,and the LED is off when the battery is full or without battery.
6: DC6V Power Input;
7: Two-color indicator led, Work/code indicator led
*Green:Long light on stand for normal working; Flashing stand for pairing code state;After pair code,the green led is off and Red led is on,then short press the power key/code key of the transmitter,it means the pair code is successful,meantime,the Red led will change into Green and the Green led is on all the time.
*Red:stand for not normal working
8,9,10,11:4-level volume and alarm indication function
* Wet Alarm,No 8 and No 9 lights flash and the receiver get “Beep,Beep,Beep” alarm voice every 4 seconds.
* Temperature Alarm,No 8,9,10 three lights flash and the receiver get “Beep,Beep,Beep” alarm voice every 4 seconds
12:Vibrate ON/OFF: Turn on/Turn off the vibration alarm function
13: Two-color indicator led, Low voltage indicator
* Green Led:Battery voltage is normal
* Red Led:Low battery voltage or without battery
14:VOL-:Turn down the volume
15:VOL+:Increase the volume
16:Horn
17:Battery cover,3 pcs AA Dry Battery